OPERATING AND OPERATION
65
WL50
Adjusting the operator’s seat5.1. 4
You can adjust the operator’s seat to t your height and
posture. This keeps your muscles relaxed and prevents
you from tiring while working.
Adjust the seat so that you can comfortably reach the levers
and pedals with your back against the backrest.
You can adjust the seat in the following ways (Fig. 26):
WARNING
Personal injury or property damage hazard.
Adjusting the operator seat while the wheel loader
is in operation can cause inadvertent control move-
ments.
Do not adjust the operator seat while the wheel
►
loader is in operation.
Stop the machine rst and then adjust the
►
seat.
The doors can also be locked in a slightly open position. To
do this, ip the locking lever (Fig. 25) over.
Always check that the cab doors and windows are closed
before leaving the loader.
Fig. 25
Door put-up hinges
To Next Page
Loading...
