SERVICING AND INSPECTION
138
SERVICING AND INSPECTION10
Basic safety instructions for servicing and inspection10.1
Operator’s Manual
Perform servicing and inspection work only if you have •
read and understood the Operator’s Manual.
Observe the basic safety instructions and all the warning
•
signs attached to the loader.
The Operator’s Manual describes the work to be per-
•
formed. However, the descriptions of work processes
provide the necessary instructions only for experienced
specialized technicians.
Keep the Operator’s Manual with the loader at all
•
times.
Personnel
Maintenance and inspection personnel must have spe-
•
cialized knowledge of servicing and inspection work
on the loader. The specialized knowledge required can
be obtained at training sessions from Wacker Neuson
Service.
Perform servicing and inspection work only with suitable
•
work clothing and personal protective equipment.
Wear hearing protection should there be noise exceed-
•
ing 90 dbA.
To Next Page
Loading...
