Wacker Neuson WL 50

OPERATING AND OPERATION
76
Headlights and rotating beacon5.2.3
The loader is equipped with headlights and taillights.
WARNING
Personal injury or property damage hazard. Work-
ing and driving lights can blind passing motorists.
Do not drive on public roads with working lights ►
illuminated.
Conrm that the driving lights are aimed to avoid ►
blinding oncoming trafc.
Operate the taillights using the rocker switch Item
12 (Fig. 33) the same way you would the front
headlights.
The switches for switching on the headlights are located
in the cab to the right above the operator‘s seat (Fig. 33).
Switch the headlights on/off with the rocker switches Items
11 and 12.
Front headlights:
Put the rocker switch Item 11 in position 1:•
The headlights switch on. –
Put the rocker switch Item 11 in position 0:•
The headlights switch off. –
Rear headlights:
Fig. 33
Headlight and rotat-
ing beacon switches
1211 1514
0 Position
1 Position