Wacker Neuson WL 50 User Manual

OPERATING AND OPERATION
75
WL50
Switch the rear windshield wiper and windshield washer
system on/off with the rocker switch Item 13 (Fig. 31).
Move the switch Item 13 into position 1:•
The rear windshield wiper switches on. –
With your nger, move the interlock Item a in the switch •
Item 13 downwards. Now you can move the switch Item
13 into position 2.
The back washer system switches on. –
Move the switch Item 13 into position 0:•
The rear windshield wiper switches off. –
WARNING
Burn and cutting/shearing hazards from hot or mov-
ing engine parts.
Do not open the engine enclosure until the en- ►
gine has stopped.
Do not attempt to service the wheel loader until ►
the hot surfaces are comfortable to the touch.
For best cleaning performance, use a formulated
windshield uid that enhances cleaning and pro-
tects the system from freezing
Fig. 32
Location of the
windshield washer
container
Filling the container for the windshield washer
system
The container for the windshield washer system is located
on the rear side of the cab to the left. Access it by opening
the engine enclosure (Fig. 32).

Wacker Neuson WL 50 Specifications

General

Brand	Wacker Neuson
Model	WL 50
Category	Compact Loader
Language	English