BASIC SAFETY INSTRUCTIONS
25
WL50
Electrical power2.4.3
Regularly check the loader‘s electrical equipment. De-•
fects, such as loose plug connections or cables with
burnt insulation, shall be replaced before resuming op-
eration.
If an electrical malfunction is discovered, stop the wheel
•
loader in a safe location, lower the loader arms and at-
tachment to the ground and stop the engine. Contact
the supervisor for diagnosis and repair by a qualied
technician before resuming operation.
Replacement fuses shall be of the same type and capac-
•
ity as specied by the manufacturer in the Operator’s
and Repair Manuals. Do not attempt to bypass a fused
system to resume operation.
Flying sparks / re danger2.4.4
WARNING
Fire hazard.
Sparks from the exhaust, or electrical equipment,
or hot machine parts can ignite explosions and
res.
Do not work in enclosed spaces where am-
►
mable materials, explosive vapors, or combus-
tible dust are found.
Stay clear of ammable materials such as hay ►
and straw.
Park the Wheel Loader only in areas free of
►
ammable materials.
To Next Page
Loading...
