SAFETY INSTRUCTIONS FOR REPAIRS
228
SAFETY INSTRUCTIONS FOR REPAIRS12
Observe in particular:
The basic safety instructions.•
The basic safety instructions for servicing and inspec-•
tion.
All warning signs and instructions attached to the load-
•
er.
That the descriptions of work processes provide the
•
necessary instructions only for experienced specialized
personnel.
That the Operator’s Manual is always kept with the
•
loader
Repair personnel:
Repair personnel must have specialized knowledge and
•
experience in repairing this or comparable loaders.
Should knowledge be lacking, training by experienced •
repair, e.g. Wacker Neuson Service, should be per-
formed.
General safety regulations for repairs12 .1
Operator’s Manual:
Perform repairs only if you have read and understood
•
the Operator’s Manual.
The »Safety instructions for repairs« section does
not consist of instructions for repairs, but rather of
safety instructions which, in addition to the gener-
ally valid safety regulations for repair work, refer to
hazards that could occur during repair work, and
of notes which should prevent the machine from
being damaged during repairs.
Specic repair instructions are not included in this
Operator’s Manual.
To Next Page
Loading...
Need help?
General
