OPERATING AND OPERATION
94
Before traveling from worksite to worksite over •
extended distances, engage the loader lift arm
lock after selecting the height for the travel arms
for the travel segment.
Do not release the loader lift arm lock until start-
•
ing the work cycle, or after parking the loader
and prior to lowering the lift arms to the ground
with the attachment.
The loader lift arm can be secured against unin-
tentional operation by means of a locking mecha-
nism.
If you have switched on the locking mechanism,
the loader lift arms will not move if the loader con-
trols are moved. When the locking mechanism is
switched on, the control lamp in the switch lights
up (Fig. 40), and it is impossible to activate the
loader lift arm.
Loader lift arms locking system5.4.2
Activate the loader lift arms locking system by switching the
rocker switch (Fig. 40).
Switch the rocker switch (Fig. 40) to position 1:•
The locking system is switched on. –
Switch the rocker switch (Fig. 40) to position 0:•
The locking system is switched off. –
Fig. 40
Switch for the lock-
ing mechanism of
the loader lift arms
To Next Page
Loading...
