Wacker Neuson WL 50 - Product Identification Number Plates; Fig. 10 Vehicle ID

TECHNICAL DATA
43
WL50
Product identication number plates3.3
A product identication number plate is attached to the
loader on the right side of the front carriage (Fig. 10).
It lists the following information:
Manufacturer•
Year built•
Vehicle ID•
Type•
Engine power•
Axle loads•
Operating weight•
Permissible total weight•
In addition, the vehicle ID is engraved on the right side of
the rear end near the entry area (Fig. 10/1).
Furthermore, the following loader components each have
their own rating plate:
The diesel engine•
The axial piston variable displacement pump (hydraulic •
transmission pump)
The oil engines (hydraulic traction motor)•
The axles.•
Fig. 10
Vehicle ID
1