Wacker Neuson WL 50 User Manual

BASIC SAFETY INSTRUCTIONS
20
Safety instructions for other operating modes2.3.2
These safety instructions refer to special tasks relating to the
use of the loader and servicing tasks - as well as emergency
maintenance during operation or work concerning disposal
of the auxiliary and operating materials.
The Operator’s Manual provides adjustment, mainte- •
nance and inspection information and schedules in
subsequent sections. This information is essential to
ensuring peak performance satisfaction and safety over
the life of the wheel loader.
This Operator’s Manual provides routine adjustment •
and maintenance procedures in addition to operating
instructions. Diagnosis and repair of the wheel loader
requires special skill, training and tools. Your Wacker
Neuson dealer has the trained technicians to perform
such work safely and effectively.
Maintenance and repair work shall be performed by •
operators and technicians trained and knowledgeable
of the wheel loader function and attachments.
Do not attempt to perform maintenance or repair on the •
wheel loader until the machine and engine is stopped and
all attachments are in a stable position. Do not attempt to
perform maintenance or repair work on hot surfaces or
components of the machine. Read and understand the
procedure for maintenance and repair in the Operator’s
and Repair Manuals for this wheel loader.
Secure the maintenance area, allowing as large a space •
as required.
If the loader is being completely shut off during servicing •
and maintenance work, please observe the following
(see the chapter »Securing the Loader«):
Secure the loader from being accidentally turned back -
on by removing the starting key.
Attach a warning note to indicate that the loader is be- -
ing worked on.
Only perform servicing and maintenance work if the -
loader is parked on an even, hard surface and secured
from rolling away and articulating at the steering swivel
point..
Before performing work with the loader arms raised, -
install the support provided to prevent the loader arms
from lowering suddenly and inadvertently.
This device shall conform to ISO 10533. -

Wacker Neuson WL 50 Specifications

General

Brand	Wacker Neuson
Model	WL 50
Category	Compact Loader
Language	English