OPERATING AND OPERATION
84
Propulsion operation5.3
Description of the propulsion hydraulics
See »Hydraulics« section of 3.1 Technical Description on
page 40.
Preparation for travel in public trafc5.3.1
Secure the attachment:1.
Ensure that the bucket has been emptied and has been
–
lowered to transport position.
Put the tooth guard on the bucket. –
Check the lighting system, and if applicable, the function
2.
of the rotating beacon.
Switch on the headlights.
Adjust the attachment height for clearance with the road
3.
surface, but not more than necessary for safe transport
to avoid visibility restrictions and reduced stability.
Do not travel with the loader arms completely raised to 4.
avoid collision with overhead objects such as viaducts
and electrical power lines.
After adjusting the loader arm height, engage the travel
5.
lock to prevent unintentional control activation.
Conrm that the seat belt is properly adjusted.6.
Survey the surrounding area to ensure that moving into
7.
trafc can be done safely.
Before you start travel, make sure that the ma-•
chine complies with the relevant local regula-
tions.
Fork prongs of pallet forks must be dismantled •
before undertaking trips in public trafc.
To Next Page
Loading...
