BASIC SAFETY INSTRUCTIONS
28
Transporting and towing / restarting2.5
Instructions are provided in this Operator’s Manual for •
towing, loading and transporting the wheel loader safely
without machine damage.
The towing machine shall be capable of towing the wheel
•
loader.
The loading and transport equipment shall be appropri-
•
ate to safely complete the sequence of operation. If the
wheel loader is to be lifted by a crane device, consult
the machine specications to select the correct crane
capacity and OSHA lifting devices to safely complete
the lifting operation.
Only restart the loader according to the Operator’s
•
Manual.
See Chapter 6 for complete transporting and towing
•
instructions.
Final decommissioning / dismantling2.6
Drain and dispose of all uids in suitable containers and
•
dispose of the uids in an environmentally responsible
manner. Do not dispose in sewers, streams, lakes or
on the ground.
Remove the battery and dispose of it at an authorized •
recycling center. Remove the starting motor to disable
the engine.
Dismantle and recycle the components according to the
•
material instructions on the individual parts. Tires and
rubber based parts can be recycled separately.
To Next Page
Loading...
Need help?
General
