BASIC SAFETY INSTRUCTIONS
15
WL50
Organizational measures2.1
The following safety instructions are directed at the operator
/ user of the loader.
Always keep the Operator’s Manual in the compartment
•
provided for it.
As a supplement to the Operator’s Manual, universally •
valid legal and other binding regulations relating to road
trafc, compulsory coverage, accident prevention and
environmental protection must be observed, and users
must be instructed to observe them. This applies in par-
ticular to the maximum speed, depending on the model
and the permissible total weight of the loader.
If required, instruct that personal protective equipment be
•
worn. This applies particularly to the handling of harmful
substances at the location of use.
Supplement the Operator’s Manual with instructions,
•
including supervisory and reporting requirements, taking
into account differences between various companies,
e.g. with regard to the organization of work, work pro-
cesses or personnel used.
Personnel who have been assigned to operate the loader
•
must have read the Operator’s Manual before operating
the wheel loader especially the chapter Basic Safety
Instructions.
Observe all safety messages on the loader and in the •
Operator’s Manual.
Make sure that all safety messages on the machine
•
are legible.
If the loader becomes unserviceable, stop operating and
•
inform the supervisor that the wheel loader is not func-
tioning normally. Alternately, contact a trained technician
to diagnose and correct the condition before resuming
operation.
No modications shall be made to the wheel loader.
•
Contact your Wacker Neuson dealer for specic advice
regarding the use of the wheel loader and approved
attachments.
To Next Page
Loading...
