SERVICING AND INSPECTION
162
General safety check10.5
Check:
all steel parts for damaged and loose screws/bolts, par-
•
ticularly the ROPS structure,
the condition of the seat belt,•
the quick-change system for the attachments,•
that all the hinge pins are in the correct position and are
•
secured by their locking devices,
that the step and handles are in good condition, clean •
and t well,
cab windows for cracks and fractures,•
the condition of the reectors and the lighting, including
•
the work lights,
the tires for damage and any sharp-edged objects that •
have penetrated them,
the condition of all warning and message labels.•
Immediately rectify any damage detected during
the safety check. Damaged parts must be imme-
diately repaired or replaced. Do not use the loader
again until the damage has been rectied profes-
sionally.
To Next Page
Loading...
