SAFETY INSTRUCTIONS FOR REPAIRS
231
WL50
Engine12.2
Perform repair work only if the loader is secured as de-
•
scribed in Section 9, page 137 »Securing the loader«.
Welding work12.3
Only a certied trained welder shall perform welding
•
work.
Only certain authorized individuals under the supervi-
•
sion of a competent person may weld containers which
contain or have contained substances that are com-
bustible, promote combustion, are explosive, or can,
during welding, produce vapor, gas, mist or dust that
are hazardous to health. Should you have problems or
questions, it is imperative that you consult the Wacker
Neuson Service.
WARNING
Improper handling of the ROPS/FOPS can com-
promise its integrity.
Do not drill, weld, straighten, or bend the ROPS
►
/ FOPS protective structures.
Allow only trained authorized personnel to install
►
new ROPS / FOPS structures.
To Next Page
Loading...
