SAFETY INSTRUCTIONS FOR REPAIRS
232
Before performing welding work on the loader
Disconnect the battery as described in this Operator’s •
Manual.
Disconnect the positive pole (terminal B+) on the gen-•
erator.
Switch OFF the battery disconnect switch (if present).•
Protect bare terminals and connections against short-
•
circuiting.
Attach the welding grounding terminal in the immedi-
•
ate vicinity of the welding site. Do not allow the welding
current to pass through gears, bolts, articulated joints
or hydraulic cylinders.
After welding has been completed:
Reconnect all the electrical connections and check that
•
they function.
Connect the battery as described in this Operator’s
•
Manual.
To Next Page
Loading...
