OPERATING AND OPERATION
97
WL50
Detent mechanism for the optional hydraulics
This function allows you to operate the optional hydraulic
connections in continuous use. This function is necessary
for certain attachments powered by a hydraulic motor that
necessitates continuous use (e.g. broom). Then you do not
have to constantly hold the control lever for the optional
hydraulics.
Move the control lever for the optional hydraulics for-
•
wards past normal operation position:
The lever will be locked, providing continuous hydraulic
–
pressure and ow.
NOTICE
Overheated hydraulic oil can damage the machine.
Make sure that the control lever for the optional
hydraulics is always in »zero position« when the
detent mechanism is not required.
To Next Page
Loading...
