DesCRIpTION Of The INDICATOR, WARNING AND CONTROl elemeNTs
48
Control and warning lightsFig. 13
Control and warning indicator lights4.2
If the indicator lights do not illuminate properly •
at the starting sequence, repair the malfunction
before operating the machine.
If an indicator light illuminates during operation,
•
move the machine to a safe place, lower the
loader arms and stop the engine.
Do not operate the wheel loader until the reason
•
for the illuminated indicator is determined and
corrective action has been completed.
Immediately turn off the engine if a light marked with
this * symbol is illuminated in the adjacent table.
1 2 3 4
5
6 7 8