OPERATING AND OPERATION
80
Perform the 1. »Before entering the cab« checks prior to
starting the engine (see the chapter »Operation«).
Adjust the operator’s seat and the steering column as
2.
needed.
Adjust the rear view mirror / exterior mirror.3.
Put on your 4. seat belt.
Before starting the engine5.2.5
Before starting the engine:
Make sure that no one is on or near the load-
•
er.
Keep the operating elements clean and dry.•
Remove or tighten all loose objects in the
•
cab.
Make sure that the cab windows and exterior
•
mirrors are clean.
While in the operator’s seat, position the exterior
•
mirrors so that you have a good view of the area
immediately behind the loader.
Make sure that all safety devices are tted, all •
tools have been removed after repairs, and the
enclosure is closed.
To Next Page
Loading...
