SECURING THE LOADER
137
WL50
SECURING THE LOADER9
The following instructions apply to stopping and
parking the loader after daily operation, transport-
ing the loader and to all servicing, inspection and
repair work.
Place the loader on an even, dry surface that can sup-•
port sufcient weight.
Lower the loader lift arms.•
Engage the parking brake and stop the engine.•
Switch off all electrical switches.•
Relieve the pressure in all hydraulic circuits by cycling •
the controls after the engine has stopped.
Secure the loader with the wheel chock.•
Clean dirt off the loader.•
Perform a visual inspection to make sure there are no •
leaks:
in the hydraulic system -
in the cooling system -
in the fuel system -
Perform a visual inspection for damage to the loader,
•
especially on the tires, attachments and locking mecha-
nism for the attachments.
Fill the fuel reservoir and check the operating level of
•
the other uid reservoirs after the temperature has been
reduced to a level that is comfortable to touch.
Secure the loader against unauthorized use:•
Remove the starting key -
Close the windows, doors, reservoir lid and engine en- -
closure.
To Next Page
Loading...
Need help?
General
