OPERATING AND OPERATION
60
Before entering the cab
Check that the loader is clean and undamaged.•
Check that the handles and steps are in good condition
•
and clean.
Check that the cab windows are in good condition and •
clean.
Check that all safety components are present and fully •
functional.
Check that the rods, cylinders, hinge pins and coolers •
are clean.
Check that all the fasteners, joints and hinge pins t
•
tightly.
Check that all the safety messages and instructional
•
labels are present and in good condition.
Check the loader for oil, fuel and coolant leaks.•
Operation5.1. 2
WARNING
Personal injury hazard.
Do not operate the loader if it is not in service- ►
able condition or responding correctly to control
commands.
Park the machine in a safe place, lower the
►
loader arms and attachment, stop the engine
and notify your supervisor.
Do not operate the machine until the problem
►
has been corrected.
Check that the safety devices are present and ►
operative each time before you start up the
loader.
Replace damaged tires to avoid loss of produc-
►
tion and stability due to sudden deation.
Maintain a neat uncluttered operator space to
►
prevent slipping, tripping and potential impedi-
ments to control movement.
Keep the operating elements clean. ►
Follow the daily servicing schedule. ►
To Next Page
Loading...
Need help?
General
