OPERATING AND OPERATION
61
WL50
Check:
Engine oil level•
Hydraulic uid level•
Coolant level•
Fuel level•
Check the condition of the tires, looking for abrasion,
•
cuts or wear. Check the tire pressure! Ensure that the
tires are inated to the proper pressure (see tire pres-
sure table).
Ensure that the engine enclosures and the caps for the
•
fuel reservoir and hydraulic uid reservoir are present
and have been tightened.
Operator station access
WARNING
Slipping hazard.
Check that the handles and steps are in good ►
condition and clean before entering and exiting
the wheel loader control station..
Use the attached handles and steps. ►
Always get in and out with your face turned to- ►
ward the loader.
To Next Page
Loading...
