BASIC SAFETY INSTRUCTIONS
38
Loader lift arm locking system2.8.7
Activate the loader lift arms locking system by switching the
rocker switch (Fig. 9).
Switch the rocker switch (Fig. 9) to position 1:•
The locking system is switched on. –
Switch the rocker switch (Fig. 9) to position 0:•
The locking system is switched off. –
CAUTION
Possibility of inadvertent loader lift arm activation.
Inadvertent activation can result in the loader arms
dropping causing the bucket or attachment to en-
gage the road surface. This can result in loss of
machine control with possible injury to the operator
and other work site persons.
Always lock the loader lift arm control to prevent
►
inadvertent activation during travel.
The operator shall not leave the operator seat ►
until the loader arms and attachment have been
lowered to and are resting on the ground.
The loader lift arms can be secured against unin-
tentional operation with an arrest.
When the arrest is switched on, the control lamp in
the switch lights up (Fig. 9), and the loader lift arms
will not move if the loader controls are moved.
Fig. 9
Switch for loader lift
arms lock
To Next Page
Loading...
