SAFETY INSTRUCTIONS FOR REPAIRS
230
Do not remove seals or sealing wax:
Changing rated pressures for relief valves is prohibited •
without the express consent of Wacker Neuson.
Do not damage or remove seals and sealing wax on
•
the engine, the pressure limiting valves and accumula-
tors.
If an area is repainted and a safety label is damaged or
•
obliterated, replace the label before using the machine.
If a removed component or assembly had a safety mes-
sage label, replace the label with the replacement part.
Your Wacker Neuson dealer can help you to get replace-
ment labels for your machine
After completing the repair:
Put protective paint on all uncoated machine parts to
•
prevent corrosion damage.
Install the cab mounting screws again after the repair
•
work has been completed.
Reattach all safety devices, covers and noise/vibration •
insulation after repair work has been completed.
Check the functioning of the loader, in particular the
•
parts repaired in trial operation. Make sure that no one
is in the loader‘s danger area.
Do not approve the loader for operation until all the
•
loader‘s areas function properly.
To Next Page
Loading...
