OPERATING AND OPERATION
77
WL50
The rotating beacon
Use the yellow rotating beacon according to local
regulations.
(optional equipment)
If you want to use a rotating beacon, mount it on the fastener
provided (Fig. 5).
The switch for operating the rotating beacon is located in
the cab above the operator’s seat (Fig. 33).
Put the rocker switch Item 15 in position 1:•
The rotating beacon switches on. –
Put the rocker switch Item 15 in position 0:•
The rotating beacon switches off. –
Rear window heating
The loader has a heated rear window. With this heater, you
can keep the rear window free of ice in cold weather.
The switch for switching on the rear window heater is located
in the cab above the operator‘s seat (Fig. 33). Switch the
rear window heater on/off with the rocker switch Item 14.
Move the rocker switch Item 14 into position 1:•
The rear window heater is switched on. –
Move the rocker switch Item 14 into position 0:•
The rear window heater is switched off. –
To Next Page
Loading...
