OPERATING AND OPERATION
70
Buckling the seat belt
Sit back in the operator seat, so that your entire back is
1.
touching the seat.
Place the seat belt over your lap.2.
Seat belt must not be twisted.3.
Insert the seat belt tab Item 1 into the opening in belt
4.
buckle Item 3 until it clicks.
If necessary, adjust the seat belt to your body size.
5.
See
section »Adjusting the seat belt« (page 71).
Releasing the seat belt
Press the red button Item 2 on the belt buckle.1.
1
2
3
Fig. 28
Buckling the seat
belt
To Next Page
Loading...
