OPERATING AND OPERATION
82
Push the foot accelerator.1.
Starting:2.
Put in the key - level 0 = no operating voltage.•
Turn the key to the right - level I = operating voltage;•
The indicator lights (oil pressure, alternator) must be
illuminated
Turn the key to the right against spring pressure.•
Level II = Preheating
• Turn the key further to the right against spring pressure
- level III = start.
Let go of the key as soon as the engine starts - the
•
key will return to level I - and the indicator lights will go
out.
Check if all the indicator lights have gone out, correct
3.
any possible malfunctions before driving off with the
loader.
Description of the starting process
Use the starting key to start the loader‘s engine (Fig. 37).
Fig. 37
Starting switch
I
0
II
III
To Next Page
Loading...
