42 Device Description WAGO I/O System 750 XTR
750-677/040-000 4PWM 24 VDC 0.2A XTR
Manual
Version 1.0.0
3.8 Process Image
The I/O module provides the fieldbus coupler/controller with 12 byte input and
output process image via 4 logical channels.
The meaning of the input and output data depends on the set operating mode.
The individual operating modes and their associated process images can be
found in Section “Operating Modes”.
Mapping of process data in the process image of fieldbus systems
The representation of the process data of some I/O modules or their variants in
the process image depends on the fieldbus coupler/controller used. Please take
this information from the section “I/O Modules” included in the description
concerning the process image of the corresponding coupler/controller.
To Next Page
Loading...
