WAGO I/O System 750 XTR Functions 63
750-677/040-000 4PWM 24 VDC 0.2A XTR
Manual
Version 1.0.0
5 Functions
The following actions can be carried out:
• Read out module information
• Configure PWM outputs
• Enter process data
• Output process data
• Update the firmware (see Section “Service” > ”Firmware
Update/Downgrade”)
• Downgrade the firmware (see Section “Service” > ”Firmware
Update/Downgrade”)
5.1 Tooling
The following matrix specifies which tool can be used to make settings on the I/O
module:
Diagnostics:
undervoltage
Diagnostics: short
circuit