3-14 Using the Detector
0-9 – Enters the corresponding
number into the current field.
Also positions the cursor at the
corresponding entry in a list
(0 = tenth item). Selects the
corresponding number from a
list.
0-9 – See the descriptions
that follow for specific,
shifted, numeric keys.
1 – See 0-9 above. Lamp – Displays the lamp
use statistics for the
currently installed lamp
and allows you to turn the
lamp on or off. The state of
the lamp is indicated by an
icon on the home screen.
2 – See 0-9 above. Lock – When you are
viewing the home screen,
enables or disables the
keypad lock feature. Use
the lock to prevent
inadvertent changes to
detector settings. The
current lock state is
indicated by an icon on the
home screen.
3 – See 0-9 above. Calibrate – Initiates the
wavelength calibration
routine.
4 – See 0-9 above. System Info – Displays
system information
including software version,
checksum, and instrument
serial number.
2475 detector keypad description (Continued)
Key
Description
Unshifted After pressing shift
0 - 9
Lamp
1
Lock
2
Calibrate
3
System Info
4
To Next Page
Loading...
