Programming methods and events 3-43
Results in the auto-optimize gain table
Once you clear the display by pressing home, the auto-optimize gain
diagnostic test is automatically disengaged. With the proper gains and EUFS
values specified in the method, the chromatogram is on scale.
Gain and EUFS optimally set
Programming methods and events
Storing methods
You can store and retrieve up to ten methods. The detector designates stored
methods as the numerals 1 through 10. If you are using a stored method
during operation, the method number appears on the home screen (see the
figure “Finding parameters in the fluorescence home screen” on page 3-4). An
asterisk in the method number icon (see the table titled “2475 detector home
Minutes
Fluorescence
To Next Page
Loading...
