Safety
28.03.2022 11 / 112
Mandatory
Applicable guideline, measure.
Info
Informative comment.
Tip
Recommendation or advice.
2.2 Proper use
The "ProofMaster" leak tightness testing device is used exclusively for
testing the water resistance of watches by means of positive and
negative pressure.
The ProofMaster can be used to check the water resistance of both
digital watches and analogue or pocket watches in accordance with the
watch manufacturer's specifications.
You can also use the ProofMaster to build up positive pressure in the
case of a leaky watch to then find the leak by testing it in water.
The device is intended for watches with the following maximum
dimensions:
• Diameter: 70 mm
• Thickness: 30 mm
• Width: 85 mm
Proper use also includes observing all the information in the document.
Any use that deviates from the proper use is considered improper use.
CAUTION
Risk of injury if the device is used improperly!
Improper use of the ProofMaster can result in hazardous situations.
To Next Page
Loading...
