General information
28.03.2022 7 / 112
1 General information
Purpose of the
documentation
This documentation contains the necessary information for the proper
operation of the device.
This allows the user to perform operating or maintenance procedures
efficiently.
For reasons of safety and environmental protection, the service
instructions must be followed. In any case, the documentation should be
consulted.
Liability
Witschi Electronic AG assumes no liability for errors or omissions.
Conformity with standards
and guidelines
The "CE" marking confirms that this product complies with the
European requirements regarding safety, health, environmental and
user protection.
See also the declaration of conformity supplied with the machine.
Proper use
The instructions in this document must be observed, in particular the
safety precautions.
General information
This document has been prepared on the basis of the information
available at the time of its publication.
These instructions enable safe and efficient handling of the ProofMaster
leak tightness testing device (referred to in the following as "device" or
"ProofMaster"). These instructions are an integral part of the device and
must be kept near the device so that it can be accessed by personnel at
all times.
Personnel must have carefully read through and understood these
instructions before starting work. To ensure safe working, the safety
indications, warnings and instructions must be followed.
In addition, the local health and safety regulations as well as the
general safety rules for operation of the ProofMaster must be observed.
Illustrations contained in these instructions are intended for illustration
purposes only and may deviate from the model sold.
To Next Page
Loading...
