Witschi ProofMaster - Required Accessories

Description
28.03.2022 31 / 112
Protective cover
Item no.: 31.24.04.30.001
The dust cover covers the ProofMaster when not in use to protect it
from dust deposits.
Mandatory
When not in use, always cover the ProofMaster with the
corresponding dust cover.
This prevents the test chamber from leaking due to dust and dirt
penetrating between the seal and bell cover.
4.3 Required accessories
Compressor
In order to use the ProofMaster, it must be connected to a compressor.
The compressor must have the following characteristics:
Description Unit Value
ARO 210 coupling - -
Maximum outlet pressure bar 12
Nominal outlet pressure for full operation of
the ProofMaster
bar 11
Capacity of the compressed air tank litres Min. 4
Compressed air quality - Dry and clean
(air filter)
Tip
Witschi Electronic AG has a compressor that is optimally
suited for the. ProofMaster.
JunAir 6–10 compressor 10l, item no. 97.91.103 (230VAC) and
97.91.104 (110VAC).
• For further information, please contact a point of sale.