Use
44 / 112 28.03.2022
5.2.7 Selecting the program (ProofMaster PRO)
Info
This function is available in the ProofMaster PRO software
version.
Quick select
Quick select is used for individual tests or for a single watch. Essentially,
quick select is intended for a watchmaker who wants to test a watch
before or after a repair, for example.
a) Press .
ð The Quick select screen appears.
b) Program the test.
ð See Programming a quick test [}Page41].
Programs
The programs are generally used in production to carry out
measurements in a series of identical watches.
To Next Page
Loading...
