Witschi ProofMaster - Page 50

Use
50 / 112 28.03.2022
6 Measured deformations for each test
7 Leak rate (only in Precise mode)
8 End result of the test
9 Total testing period
The following examples show possible display phases.
Test running Test OK
Test rejected Test manually aborted
Reduced display
1
2
4
3
The reduced display provides the following information:
1 Test specimen prefix
2 Name of the operator (only with enabled identification, in the example
above Opera)
3 Progress and result of each test step
4 End result of the test