EasyManuals Logo
Home>Xerox>All in One Printer>AltaLink C80 Series

Xerox AltaLink C80 Series User Manual

Xerox AltaLink C80 Series
371 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #110 background imageLoading...
Page #110 background image
Xerox
®
Apps
110 Xerox
®
AltaLink
®
C80XX Series Multifunction Printer
User Guide
8. To start the scan, touch Scan.
9. If Build Job is enabled, when prompted, do these steps.
To change settings, touch Program Next Segment.
To scan another page, touch Scan Next Segment.
To finish, touch Submit.
10. To return to the Home screen, press the Home button.
Scanning to a USB Flash Drive
You can scan a document and store the scanned file on a USB Flash drive. The Scan to USB function
produces scans in .jpg, .pdf, .pdf (a), .xps, and .tif file formats.
The Scan to USB feature is available as the USB workflow in the Workflow Scanning App.
Note: Only USB Flash drives formatted to the typical FAT32 file system are supported.
To scan to a USB Flash drive:
1. Load your original documents.
2. At the printer control panel, press the Home button.
3. Insert the USB Flash drive into the USB memory port.
4. At the USB Drive Detected screen, touch Scan to USB.
Note: If the USB Flash drive is inserted in the printer already, touch Workflow Scanning. Touch
Change Workflow, then touch USB.
5. To add a file destination, touch Add File Destinations, then select a file destination from the list.
6. Adjust the workflow scanning settings as needed.
To save the scanned document as a specific file name, touch the attachment file name, enter a
new name, then touch OK.
To save the scanned document as a specific file format, touch the attachment file format, then
select the required format.
If you are using the document glass, to combine pages into a single scan file, enable Build Job.
If you are scanning from 2-sided original documents, touch 2-Sided Scanning, then select an
option.
For details about available features, refer to Apps Features on page 359.
7. To start the scan, touch Scan.
8. If Build Job is enabled, when prompted, do these steps.
To change settings, touch Program Next Segment.
To scan another page, touch Scan Next Segment.
To finish, touch Submit.
WARNING: Do not remove the USB Flash drive while the printer is processing the scan job.
If you remove the Flash drive before the transfer is complete, the file can become unusable
and other files on the drive can be damaged.
9. To return to the Home screen, press the Home button.

Table of Contents

Other manuals for Xerox AltaLink C80 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox AltaLink C80 Series and is the answer not in the manual?

Xerox AltaLink C80 Series Specifications

General IconGeneral
BrandXerox
ModelAltaLink C80 Series
CategoryAll in One Printer
LanguageEnglish

Related product manuals