Xerox
®
Apps
Xerox
®
AltaLink
®
C80XX Series Multifunction Printer 129
User Guide
5. Enter recipients.
− If the entry screen is displayed, touch an option, or touch X.
− To select a contact or group from the Device Address Book, touch the Device Address Book
option, then select a recipient.
− To enter the fax number manually, touch Manual Entry. In the Enter Fax Number field, ent
er
th
e fax number, then touch Add.
− To add more recipients, touch Add Recipient, then repeat the procedure.
Note: To insert a pause as needed, touch Dial Pause. To enter longer pauses, touch Dial Pause
multiple times.
6. Adjust server fax settings as needed.
− To scan more documents using the document glass, or to change settings for different sections
of the job, touch Build Job.
− If scanning from 2-sided original documents, touch 2-Sided Scanning, then select an option.
For details about available features, refer to Apps Features on page 359.
7. Touch Send.
8. If Build Job is enabled, touch Scan and when prompted, do these steps.
− To change settings, touch Program Next Segment.
− To scan another page, touch Scan Next Segment.
− To finish, touch Submit.
9. To return to the Home screen, press the Home button.
Sending a Delayed Server Fax
You can set a time in the future for the printer to send your fax job. The delay can range from
15 minutes through 24 hours.
Note: Before you use this feature, set the printer to the current time.
To specify the time to send your server fax:
1. Load your original documents.
2. At the printer control panel, press the Home button.
3. Touch Server Fax.
4. Add server fax recipients, then adjust server fax settings as needed. For details, refer to Sending a
Server Fax on page 127.
5. Touch Delay Send.
6. Touch Delay Send, then set the time to send the server fax:
− To set the hour, touch the Hour field, then use the numeric keypad, or touch the arrows.
− To set the minutes, touch the Minute field, then use the numeric keypad, or touch the arrows.
− If your printer is set to display the 12-hour clock, touch AM or PM.
7. Touch OK.
8. Touch Send. The fax is scanned and saved, then sent at the time you specified.
9. To return to the Home screen, press the Home button.
To Next Page
Loading...
Need help?
General
