Paper and Media
Xerox
®
AltaLink
®
C80XX Series Multifunction Printer 183
User Guide
Loading Paper in Tray 5
Tray 5 supports the widest variety of media types. You can use the tray for small-quantity jobs that use
special paper, such as labels, transparencies, and envelopes. The tray extension provides support for
larger paper sizes.
Notes:
• Use Tray 5 to load heavyweight paper types (257–280 g/m²).
• For faster print speeds, load paper 320 mm (12.6 in.) or shorter with the long edge going into
the printer.
• Load paper longer than 320 mm (12.6 in.) with the short edge going into the printer.
• To load labels, refer to Loading Labels in Tray 5 on page 193.
• To load transparencies, refer to Guidelines for Printing on Transparencies on page 196.
1. Open Tray 5, then for larger paper sizes, pull out the extension tray. If Tray 5 is already open,
remove any paper that is a different size or type.
2. Mov
e the width guides to the edges of the tray.
3. F
lex the sheets back and forth and fan them, then align the edges of the stack on a level surface.
This procedure separates any sheets that are stuck together and reduces the possibility of jams.
To Next Page
Loading...
Need help?
General
