Getting Started
Xerox
®
AltaLink
®
C80XX Series Multifunction Printer 39
User Guide
Restarting, Placing in Sleep Mode, or Powering Off the Printer
To restart the printer, place the printer in Sleep Mode, or power off the printer:
1. At the printer control panel, press the Power/Wake button.
2. Select an option.
− To restart the printer, touch Restart.
− To place the printer in Sleep Mode, touch Sleep.
In Sleep Mode, the touch screen goes dark and the Power/Wake button flashes.
− To power off the printer, touch Power Off.
− If the printer does not respond to a single press of the Power/Wake button, then press and
hold the button for 5 seconds. A Please Wait message appears as the printer powers down.
After 10 seconds, the touch screen goes dark and the Power/Wake button flashes until the
printer powers down.
3. If you are powering off the printer for an extended period, open the printer front door, then power
off the main power switch.
CAUTION: Do not unplug the power cord while the printer powers down.
To Next Page
Loading...
