Xerox AltaLink C80 Series - Job Identification; Printing Mirror Images; Selecting Job Completion Notification for Windows

Printing
Xerox
®
AltaLink
®
C80XX Series Multifunction Printer 159
User Guide
Job Identification
You can use the Job ID feature to change the job identification setting for your print job. You can print
the job identification on a separate banner page or on the pages of your document.
To change the job identification setting from the Advanced tab:
1. Click Job ID or Job Identification.
2. Select an option.
− Disable Job ID: This option directs the printer not to print a banner page.
− Print ID on a Banner Page: This option prints the job identification on a banner page.
− Print ID in Margins - First Page Only: This option prints the job identification on the first page
of the document in the top-left margin.
− Print ID in Margins - All Pages: This option prints the job identification in the top-left margin
on every page of the document.
3. Click OK.
Printing Mirror Images
If the PostScript print driver is installed, you can print pages as a mirror image. Images are mirrored left-
to-right when printed.
• To locate mirror output in Windows, on the Advanced tab, for Advanced Settings, click Mirror
O
utput.
• To locate mirror output on Macintosh, within Xerox Features, in the Advanced window, click
Mirrored Output.
Selecting Job Completion Notification for Windows
You can select to be notified when your job finishes printing. A message appears on your computer
screen with the name of the job and the name of the printer where it was printed.
Note: This feature is only available on a Windows computer printing to a network printer.
To select job completion notification from the Advanced tab:
1. Click Notifications.
2. Click Notify for Completed Jobs, then select an option.
− Enabled: This option turns on notifications.
− Disabled: This option turns off the Notification feature.
3. Click OK.