Maintenance
200 Xerox
®
AltaLink
®
C80XX Series Multifunction Printer
User Guide
3. To return the printer to Ready mode, press the Power/Wake button.
4. Use a soft, lint-free cloth to clean the outside of the output tray, paper trays, and other exterior
areas of your printer.
Cleaning the Scanner
To ensure optimum print quality, clean the document glass regularly. Cleaning helps avoid output with
streaks, smears, and other marks that transfer from the glass while scanning documents.
1. Slightly dampen a soft, lint-free cloth with water.
2. Remove any paper or other media from the output tray.
3. Open the document cover.
4. Wipe the surfaces of the document glass and CVT glass until they are clean and dry.
Note: For best results, use Xerox
®
Glass Cleaner to remove marks and streaks.
To Next Page
Loading...
