Printing
152 Xerox
®
AltaLink
®
C80XX Series Multifunction Printer
User Guide
Color Correction
Color Correction matches printer colors on PostScript jobs to colors on other devices, such as your
computer monitor screen or a printing press.
Color Correction options:
• Xerox Black and White: This feature converts all color in the document to black and white, or
shades of gray.
• Xerox Automatic Color: This option applies the best color correction to text, graphics, and images.
Xerox recommends this setting. There are 13 more selections within Xerox Automatic Color,
including Vivid RGB and Commercial.
• Custom Automatic Color: This setting provides finer control over color adjustments. There are
numerous selections for color adjustments to text, graphics, and images.
Color by Words
Color By Words allows you to adjust colors by building sentences using common phrases describing how
to change colors.
For more information, refer to the help for your print driver.
Color Adjustments
Use Color Adjustments to adjust particular characteristics of the printed color. Characteristics include
lightness, contrast, saturation, and color cast.
Note: Not all options listed are supported on all printers. Some options apply only to a specific
printer model, configuration, operating system, or print driver type.
Lightness
The Lightness feature allows you to adjust the overall lightness or darkness of the text and images in
your printed job.
Contrast
You can use the Contrast feature to adjust the variation between light and dark areas of the print job.
Saturation
Saturation allows you to adjust the color strength and the amount of gray in the color.
Color Cast
Use Color Cast settings to adjust the amount of a selected color in the print job while preserving
lightness.
To Next Page
Loading...
Need help?
General
