Xerox AltaLink C80 Series - Connecting the Printer; Connecting to a Wired Network; Connecting to a Wireless Network

Getting Started
48 Xerox
®
AltaLink
®
C80XX Series Multifunction Printer
User Guide
Connecting the Printer
This section includes:
• Connecting to a Wired Network ..................................................................................................................................48
• Connecting to a Wireless Network .............................................................................................................................48
• Connecting with Wi-Fi Direct .......................................................................................................................................49
• Connecting to a Computer Using USB .....................................................................................................................50
• Connecting with Near Field Communication (NFC) ............................................................................................50
• Configuring AirPrint .........................................................................................................................................................53
• Configuring Google Cloud Print™ ...............................................................................................................................54
• Connecting to a Telephone Line .................................................................................................................................56
Connecting to a Wired Network
Use a Category 5 or better Ethernet cable to connect the printer to the network. An Ethernet network is
used for one or more computers and supports many printers and systems simultaneously. An Ethernet
connection provides direct access to printer settings using the Embedded Web Server.
To connect the printer:
1. Connect the power cord to the printer, then plug the cord into an electrical outlet.
2. Connect one end of a Category 5 or better Ethernet cable to the Ethernet port on the back of the
printer. Connect the other end of the cable to a correctly-configured network port.
3. Power on the printer.
For details on configuring connection settings, refer to the System Administrator Guide at
www.xerox.com/office/ALC80XXdocs.
Connecting to a Wireless Network
If you have purchased the Wireless Network Adapter, you can use the Wireless Wizard to connect the
device to a wireless network. If the device is connected to a wired network, you can configure wireless
settings in the Embedded Web Server.
Notes:
• For more information, refer to the Xerox
®
Wireless Network Adapter Kit Hardware Install and
Setup instructions that are included with the kit.
• The device uses either the wireless or the wired network connection. Activating one network
connection deactivates the other network connection.
For details on configuring wireless network settings, refer to the System Administrator Guide at
www.xerox.com/office/ALC80XXdocs.