Paper and Media
192 Xerox
®
AltaLink
®
C80XX Series Multifunction Printer
User Guide
Loading Labels in Trays 1–4
1. Pull out the tray until it stops.
2. R
emove any paper that is a different size or type.
3. Ensure that the guide locks are set in the correct position for the size labels you are loading.
For details, refer to Adjusting the Paper Guides in the 520-Sheet Adjustable Trays on page 180.
Note: Trays 1–4 can print labels 106–169 g/m².
4. Load labels in the tray.
− For long-edge feed, load labels face up, with the top edge toward the front of the tray.
− For
short-edge feed, load labels face up, with the top edge toward the right of the tray.
5. C
lose the tray.
6. At the control panel, select the correct paper size, type, and color:
− Ensure that the paper type is set to Labels. To select a new paper type, touch Type.
− To select a new paper size, touch Size.
− To select a new paper color, touch Color.
7. To confirm the paper settings, touch Confirm.
To Next Page
Loading...
