Paper and Media
194 Xerox
®
AltaLink
®
C80XX Series Multifunction Printer
User Guide
− For short-edge feed, load labels face down with the top edge to the left.
N
otes:
• Do not load paper above the maximum fill line. Overfilling the tray can cause the printer
to jam.
• Do not print on label media after a label has been removed from a sheet.
• To avoid jams and misfeeds, do not remove paper from its packaging until you are rea
dy
to u
se it.
4. Adjust the width guides until they touch the edges of the paper.
5. At
the control panel, select the correct paper size, type, and color:
− Ensure that the paper type is set to Labels. To select a new paper type, touch Type.
− To select a new paper size, touch Size.
− To select a new paper color, touch Color.
6. To confirm the paper settings, touch Confirm.
To Next Page
Loading...
Need help?
General
