Xerox AltaLink C80 Series - Page 224

Maintenance
224 Xerox
®
AltaLink
®
C80XX Series Multifunction Printer
User Guide
3. Check inside the finisher for any loose staples and remove them.
4. Pinch both sides of the staple pack and remove the staple pack from the cartridge.
5. I
nsert the front side of the new staple pack into the staple cartridge, then push the rear side into th
e
cartridge.
6. Grasp the new staple cartridge by the orange handle, then insert the cartridge into the stapler until
it clicks.
7. C
lose the finisher front door.
1
1
2
1
2