Maintenance
234 Xerox
®
AltaLink
®
C80XX Series Multifunction Printer
User Guide
10. Return the booklet maker to its original position, then close the finisher door.
Replacing Staples in the Convenience Stapler
1. Lift the lever at the rear of the convenience stapler, then gently rotate the staple head toward you.
2. Grip the staple cartridge and pull it out of the stapler head.
3. Un
pack the new staple cartridge. Remove any partial strips and any staple strips that are not flat.
4. Install the new staple cartridge in the convenience stapler. The staple cartridge clicks into place.
5. Release the lever at the front of the convenience stapler, then gently rotate the staple head away
from you.
To Next Page
Loading...
Need help?
General
