Maintenance
236 Xerox
®
AltaLink
®
C80XX Series Multifunction Printer
User Guide
4. Insert the container all the way into the finisher.
5. C
lose the finisher front transport cover, then close the top cover.
Emptying the Hole Punch Waste Container in the Business Ready Finisher
C
AUTION: Do not perform this procedure when the printer is copying or printing.
1. Open the front door of the Business Ready finisher.
2. Re
move the hole-punch waste container from its slot near the top left of the finisher.
Notes:
• When you remove the hole-punch waste container, wait 10 seconds before you reinsert it into
the printer. The hole-punch counter resets after 10 seconds.
• If you remove the hole-punch waste container before the device instructs you to, empty th
e
c
ontainer before you reinsert it into the finisher.
To Next Page
Loading...
