Xerox AltaLink C80 Series - Page 293

Troubleshooting
Xerox
®
AltaLink
®
C80XX Series Multifunction Printer 293
User Guide
5. Remove the jammed staples, then push the clamp in the direction shown until it snaps into the
locked position.
WA
RNING: The points of the jammed staples are sharp. Remove the jammed staples
carefully.
6. Grasp the staple cartridge by the orange handle, then insert the cartridge into the stapler until it
cl
icks.
7. C
lose the finisher front door.