Troubleshooting
Xerox
®
AltaLink
®
C80XX Series Multifunction Printer 299
User Guide
4. Pull the staple cartridge clamp firmly in the direction shown to open it.
5. R
emove the jammed staples, then push the clamp in the direction shown until it snaps into the
locked position.
WA
RNING: The points of the jammed staples are sharp. Remove the jammed staples
carefully.
6. Grasp the new staple cartridge by the orange handle, then insert the cartridge into the stapler
assembly until it clicks.
7. Re
turn the staple cartridge assembly to its original position, then close the finisher door.
To Next Page
Loading...
